-
Ma.K Ein – 1/20 FLIEGE by WAVE
For QMHE 2025 I entered my Ma.k Fliege build. I set myself objectives focused on the finish of the kit and swapped out the pilot with help from 3D Printing.
-
Our Boy Trazyn – A Finecast Adventure
I had a fine adventure painting up the Finecast model of our boy Trazyn for my Necron army. Enjoy WIP photos and repair tips!
-
How 3D Printing can Help Kitbash Gunpla
3D printing and its advantages have found their place in plastic modelling. Here is how it can boost your current and future kitbash projects!
-
Skateboard Wheelbase Guide
This guide to skateboard wheelbases presents deck wheelbase vs. actual wheelbase, the influence of truck distance, and how to make adjustments.
-
Skateboard Riser & Hardware Guide
This guide presents skateboard riser selection based on wheel size, types of skateboard hardware, and the tools required to deal with it all.
-
3D Printed Proxies – In 1 Week
The power and convenience of 3D Printing combine again to create another unit of Skorpekh Destroyers for my Necron army.
-
3D Printed Scarabs – You can do it too!
Editing STL files in Blender to 3D print 40k Scarabs. The 3D models are scaled up and trimmed to get the best looking prints from my FDM printers. Then we painted up the models using weathering techniques, air brushing and highlighting.
-
Blender Repaired – With 3D Printing
No, I didn’t repair the program Blender as I’m still trying to memorize its keyboard shortcuts. I repaired a traditional blender with 3D printing & modelling.
-
HG Sinanju – WOW, I achieve my 1st Contest Entry!
I customised the HG Sinanju for my entry into the UC verse AU contest hosted by ZakuAurelius & USA Gundam Store.
-
SD Sinanju – Custom Painted Gunpla Kit
Completed SD Sinanju Gunpla kit with a custom paint scheme. A lot of clean up and hand painting was required!
-
Zaku Warrior – I complete my 1st (barely) airbrushed Gunpla Kit
I custom painted and weathered this Zaku Warrior with the intention of entering it into the Queensland Model Hobbies Expo (QMHE) competition.
-
GOUF – Custom Gunpla
This HGUC Gouf Gunpla kit was completed as a palette cleanser while I was beginning to prime a Full Mechanics kit.
Your cart (items: 0)
Subtotal
$0.00
Shipping calculated at checkout.
Your cart is currently empty!